CCIE Wireless Lab Exam Topics v2.0

The following topics are general guidelines for the content likely to be included on the lab exam. However, other related topics may also appear on any specific delivery of the exam. In order to better reflect the contents of the exam and for clarity purposes, the guidelines below may change at any time without notice.

Written and Lab Exam Refresh v2.0: Candidates who have  their written or lab exams scheduled November 18, 2011 or later should prepare using the CCIE Wireless Written Exam Topics v2.0, and these Lab Exam Topics v2.0.  Candidates who have written exams scheduled on or prior to November 17, 2011 should continue using the existing CCIE Wireless Written Exam Topics v1.0  and the Lab Exam Topics v1.0.  Please view the Written Exam Study/Learn tab and Lab Exam Study/Learn tab for more information on how to study and prepare for the Written Exam.

Exam Sections and Sub-task Objectives

1.00	Configure and Troubleshoot L2/L3 network infrastructure to   support WLANs
1.01	Configure and troubleshoot wired infrastructure to support WLAN's
	(a) VLANs
	(b) VTP
	(c) STP
	(d) Etherchannel
	(e) HSRP
	(f) VSS
1.02	Configure and troubleshoot network connectivity for
	(a) WLAN Clients
	(b) Standalone WLCs
	(c) Integrated  WLCs
	(d) Lightweight APs
	(e) Autonomous Aps
1.02	Configure and troubleshoot  PoE for AP's
1.03	Configure and troubleshoot QoS on the switching infrastructure
	(a) classification
	(b) end-to-end qos
1.04	Configure and troubleshoot Multicast on the switching   infrastructure
	(a) static multicast   routing
	(b) PIM
	(c) igmp
1.05	Configure and troubleshoot basic IPv4 connectivity
	(a) Subnetting
	(b) Static routing
	(c) basic OSPF
	(d) basic EIGRP
1.06	Configure and troubleshoot basic IPv6 connectivity
	(a) Subnetting
	(b) Static routing
1.07	Configure and troubleshoot wired security
	(a) ACLs
	(b) mac filtering /   port-security
1.08	Implement client to connect/authenticate to SSIDs
2.00	Configure and Troublehoot Infrastructure Application Services
2.01	Configure and troubleshoot DNS, DHCP, NTP , SYSLOG, SNMP
2.02	Configure and troubleshoot AAA Server Infrastructure
	(a) client authentication
	(b) management   authentication
	(c) Basic PKI for dot1x   and webauth
3.00	Configure and Troubleshoot Autonomous deployment model
3.01	Configuring and controlling management access
3.02	Configuring and Troubleshooting network services
	(a) NTP / sntp
	(b) SYSLOG
3.03	Configuring and troubleshooting different modes and roles
	(a) Root
	(b) WGB
	(c) Bridge
3.04	Configuring and troubleshooting SSID/MBSSID, including Bridging   groups
3.05	Configuring and troubleshooting Security
	(a) L2 security policies
	(b) association filters
	(c) MFP
	(d) peer to peer blocking
	(e) Local radius
	(f) dot1x profiles
3.06	Configuring and troubleshooting Radio Settings
3.07	Configuring and troubleshooting IGMP snooping
3.08	Configuring and troubleshooting QOS
3.09	Configuring and troubleshooting WDS (L2)
3.10	Upgrade Autonomous to Unified
4.00	Configure and Troubleshoot Unified deployment model
4.01	Configuring and controlling management access
4.02	Configuring and troubleshooting discovery mechanisms
4.03	Configuring and Troubleshooting network services
	(a) NTP
	(b) SYSLOG
	(c) DHCP
	(d) DNS
4.04	Configuring and Troubleshooting Interface settings
4.05	Configuring and Troubleshooting unified AP
	(a) dot1x
	(b) locally significant   certificates
	(c) office extend
	(f) AP Modes
	(g) AP Authentication /   authorization
	(h) High availability
	(i) Logging
	(j) local / global   configuration
4.06	Configuring and Troubleshooting AP groups
4.07	Configuring and Troubleshooting WLANs
	(a) client exclusion
	(b) load-balancing
	(c) band select
	(d) passive clients
	(e) DHCP policies
	(f) multicast VLAN
	(g) radio policies
4.08	Configuring and troubleshooting HREAP
	(a) local auth
	(b) h-reap groups
	(c) h-reap local   switching
	(d) address learning
4.09	Configuring and troubleshooting Radio Settings
	(a) client link
	(b) power
	(c) channel settings
	(d) antenna selection
	(e) beaconing
	(f) data rates
	(g) channel bonding
	(h) Cleanair
	EDDRRM
	Interferer detection
	air   qualilty
4.10	Implement RRM/ AutoRF
	(a) country selection
	(b) CHD, DCA, TPC
	(c) RF groups
	(d) profiles
4.11	Implement Local DHCP services for clients
4.12	Configuring and troubleshooting Security settings
	(a) L2 security policies   (802.11i, static dynamic WEP, mac filtering, etc..)
	(b) AAA (WLC to   Radius/LDAP)
	(c) local EAP   authentication (against local user list, and external LDAP)
	(d) peer to peer blocking
	(e) L3 security policies   (Webauth, pass-through)
	(f) WPS settings (IDS...)
	(g) ACL   Interface/CPU/WLAN
	(h) NAC
	(i) MFP
4.13	Configuring and troubleshooting mobility
	(a) L2/L3 roaming
	(b) multicast   optimization
	(c) mobilty group scaling
4.14	Configuring and troubleshooting controller redundancy/fallback   (APs and clients)
4.15	Configuring and troubleshooting  Guest
	(a) wired
	(b) wireless
4.16	Configuring and troubleshooting multicast
4.17	Configuring and troubleshooting QOS
	(a) BW profile metal
	(b) EDCA
	(c) BW restrictions
	(d) per user BW roles
4.18	Configuring and troubleshooting Mesh
	(a) AP authorization
	(b) BGN
	(c) Ethernet bridging
	(d) serial backhaul
5.00	Configure and Troubleshoot WCS
5.01	Configure and troubleshoot management access
	(a) AAA
	(b) virtual domain
5.02	Configure and troubleshoot NTP
5.03	Perform basic Operations
	(a) Create and deploy   templates, template groups
	(b) Create a floor   coverage proposal
	(c) Prepare the   building/floor map
	(d) Implement controllers   to WCS
	(e) high availability
	(f) AP placement
	(g) Mesh monitoring
	(h)  voice audits and location readiness
5.04	Performing maintenance operations
	(a) backup / restore
	(b) client   troubleshooting
	(c) AP conversion
	(d) logging
5.05	Security management
	(a) audit configuration
	(b) Rogue Detection,   classification and management
	(c)  Alerts
	(d) Alarms and Events
	(e) security index
	(f) IDS / WIPS
	(g) Service Levels
5.06	RF Management
	(a) RRM events
	(b) Cleanair
5.07	Implement MSE
	(a) Configuring and   troubleshooting management access
	(b) Implement network   services
	(c) Performing   maintenance operations
6.00	Configure and Troubleshoot WLAN Services
6.01	Voice for autonomous deployments
	(a) RF Design   considerations
	(b) Implement the network   infrastructure to support Voice over Wireless
	(c) General configuration   settings
	(d) Security settings
	(e) CAC
	(f) Audit Voice   deployments
6.02	Voice for unified deployments
	(a) RF Design   considerations
	(b) Implement the network   infrastructure to support Voice over Wireless
	(c) General configuration   settings
	(d) Security settings
	(e) CAC
	(f) Audit Voice   deployments
6.03	Video
	(a) RF Design   considerations
	(b) Implement the network   infrastructure to support Video over Wireless
	(c) General configuration   settings
	(d) CAC
6.04	Context aware services
	(a) RF Design Considerations
	(b) Location
	(c) Notifications