ID Number
|
Caveat Title
|
CSCtf63030
|
Radio get stuck when it is in the RESET or DOWN state.
|
CSCta91358
|
HREAP is locking up due to a wedge input queue on the radio interface.
|
CSCtb02136
|
AP1252 with AP groups and HREAP do not broadcast SSIDs.
|
CSCth05209
|
An OEAP configuration option needs to be removed in an unsupported platform.
|
CSCth02673
|
Errors occur when you apply the WLAN template with security as the WEP.
|
CSCtg93517
|
The wrong error message appeared while the H-REAP access point was added to a different H-Group.
|
CSCsx62302
|
REAP VLAN support mapping on an access point is lost when you upgrade from 4.2.176 to 6.0.182.
|
CSCtg93928
|
A traceback occurred on the mesh access point.
|
CSCsy90434
|
The controller command line displays that diversity was enabled for the 1522a radio.
|
CSCtg94715
|
Lock Assert dtlARPTask has caused the Cisco 5500 Series Controller to crash.
|
CSCtg74904
|
The Cisco 1142 Access Point stopped transmitting and receiving on its radio.
|
CSCth11525
|
A WLAN gets disabled after you add a new SSID to an existing access point group.
|
CSCsy93463
|
Debug the output through Telnet and SSH sessions.
|
CSCsy99905
|
RLDP constantly finds wired threats only when manually used.
|
CSCth09687
|
The controller GUI has a problem when configuring new ACL rules.
|
CSCsz19203
|
The controller crashes at SSHpmMainTask.
|
CSCsz37520
|
Noise was not factored in Channel Util calculations for AP1140.
|
CSCsz38828
|
AMAC radio core dumps: the transmitter has stopped working.
|
CSCsz40659
|
Need to reboot the wireless controller after an upgrade.
|
CSCsz42048
|
An inconsistency has occurred in the neighbor RSSI measurements.
|
CSCsz84895
|
An association response has the wrong set of supported rates for the 11b device.
|
CSCta04008
|
The call station type on the controller does not state that it is applicable to non-802.1X devices only.
|
CSCta13941
|
An access point is rejecting the association request with the status code 13.
|
CSCta34765
|
The controller console displays that invalid behavior occurred when you entered the config mirror port command.
|
CSCta41584
|
The backup port was not active when the primary port was disabled on the controller.
|
CSCta49375
|
The Cisco 4404 Controller crashes when you restart the sig11 at nPCSL_timer.
|
CSCta58642
|
LAP1252-P seems to have violated the maximum power levels in the regulatory domain.
|
CSCta71448
|
Reduce the severity of the error msg: %APF-1-CHANGE_ORPHAN_PKT_IP.
|
CSCtb20125
|
CCMP displays errors when the radio configuration is changed.
|
CSCtb34971
|
When the Controller WISM loads third-party certificates for web authentication, HTTPS port 443 is disabled.
|
CSCtb39368
|
The webauth custom page fails with some file extensions.
|
CSCtb39612
|
The WGA two device solution displays the "Cannot find MSCB for NPU SCB on console" message.
|
CSCtb42260
|
Enabling broadcast forwarding versus multicast forwarding through the controller CLI.
|
CSCtb44059
|
The controller should send the DHCP packets to the proper DHCP server.
|
CSCtb45178
|
Insufficient memory or a traceback occurred on AP1130 and AP1232.
|
CSCtb63297
|
A file read error message was reported in message log.
|
CSCtb69778
|
The output of the show log ip-port hash command was not correct in Telnet or SSH sessions. Instead, the output displayed results in the console window.
|
CSCtb92872
|
The WiSM with no access points crashed and the controller is unresponsive and you have to reset the hardware module to bring it up.
|
CSCtc01748
|
The Controller 2106 kernal panic crashed and hung while running combination stress test.
|
CSCtc13337
|
Even after the clients are associated to the controller, the message log displays an error saying no ACLS was defined on the controller.
|
CSCtc13378
|
The Cisco 5508 Controller crashed on the apfProbeThread.
|
CSCtc22661
|
An MFP anomaly was detected on deauthenticated frames.
|
CSCtc23210
|
MC2UC: Fragmentation has caused fewer clients to connect.
|
CSCtc23277
|
Radio driver is consuming all of the WLAN pool buffers.
|
CSCtc23789
|
The AP 1140 and 1250 radios were down and the interface was stuck in the reset state.
|
CSCtc29509
|
A predownload of the image has stopped after completing 18 out of the 230 access points on the controller.
|
CSCtc41797
|
RLDP does not work for G-only APs.
|
CSCtc44480
|
The access points were still transmitting ad-hoc deauths even after auto-contain was disabled.
|
CSCtc50424
|
The Cisco 5500 controller crashes and an error message "cond pbuf->dataLen <= 2048 failed" appears in the crashlog.
|
CSCtc51076
|
The "config spanningtree port mode off" settings are not saved in the backup configuration file.
|
CSCtc57611
|
Delay in Music on Hold on 7925 with HREAP AP.
|
CSCtc67372
|
On the controller with some access points, the SSH/Telnet session hangs with sh run output with paging disabled.
|
CSCtc73503
|
The radios are showing a Tx power level of 0.
|
CSCtc73527
|
Low latency MAC is not supported on the 802.11n APs.
|
CSCtc90985
|
The DMA input queue is overrun by fast Ethernet bursts.
|
CSCtc95434
|
An FTP transfer does not work on Cisco 2100 Controllers.
|
CSCtc97144
|
The 1800-seconds session that occurs after the session timeout has been fixed when H_REAP is in the standalone mode.
|
CSCtc97595
|
Only one of many gratuitous ARP packets is forwarded to the client.
|
CSCtd04572
|
Video metrics fixes and enhancements.
|
CSCtd06186
|
Directed broadcast does not work when IGMP snooping is enabled.
|
CSCtd21859
|
WLAN CKIP PSK is deleted when the Apply button is applied.
|
CSCtd23497
|
1242 AP HREAP Mode crashes after%CAPWAP-5-CHANGED the state to Join.
|
CSCtd26168
|
Incorrect source MAC address in the ARP request when the controller is in lag mode.
|
CSCtd26794
|
5508 DP was crashing and fragmentation consumes all pbufs.
|
CSCtd28542
|
The controller was crashing on EmWeb due to an access point configuration change.
|
CSCtd28757
|
The LDAP user password length needs to be increased.
|
CSCtd30669
|
WLAN security settings and session timeouts are changed after restoration.
|
CSCtd59231
|
The master bit configuration was not saved in xml.
|
CSCtd60522
|
The configuration backup adds the wrong 802.11a channel list.
|
CSCtd72649
|
The Cisco 4400 Controller crashes at osapi_task.c:3660.
|
CSCtd74472
|
The Cisco 5500 Controller crashes with the OSAPI reaper task and throws a null tunnel pointer exception.
|
CSCtd75089
|
The controller needs to have the "devshellsysapiDumpMbufStatus" command to show mbuf usage.
|
CSCtd75094
|
The access point crashed while clearing the CAPWAP MGIDs for the new client.
|
CSCtd86901
|
The mobility anchor configuration for WLAN is lost while copying the configuration through auto installation.
|
CSCtd92105
|
The controller reloads and the DHCP task reaper is reset.
|
CSCtd97011
|
When the AMAC radio core dump is observed, the neighbor discovery frames are stuck.
|
CSCtd99288
|
The client authentication trapflag cannot be configured through the CLI.
|
CSCtd99659
|
An SNMP agent inserts null data during the mesh link test.
|
CSCte08090
|
A TFTP upload fails while trying to upload a packet capture to the Windows TFTP server.
|
CSCte19262
|
The client is deauthenticated after the key exchange and displays an error message "Unable to locate AP 00:00:00:00:00:00".
|
CSCte27052
|
An inconsistency in the AAA Override feature occurred.
|
CSCte36493
|
The controller GUI displays a guest LAN error when the ingress is set to None on the anchor WLAN controller.
|
CSCte43508
|
5508 DP CRASH: buffer leaks due to ARP storm.
|
CSCte51177
|
The SNMP TRAP port number is not reflected in the configuration file of the controller.
|
CSCte55458
|
The web authentication page takes a long time to display under a heavy load.
|
CSCte62815
|
The Cisco 5508 Controller is not passing OSPF multicast traffic.
|
CSCte74879
|
The controller 5508 agentSwitchInfoPowerSupply MIB was not working.
|
CSCte76854
|
Unable to enable a WLAN on the Cisco 5508 Controller.
|
CSCte78472
|
An invalid PHY rate is returned on an ADDTS response.
|
CSCte79131
|
Containment details for the ad-hoc rogue is incorrect in the controller GUI.
|
CSCte79305
|
Auto containment for wired rogue access points does not contain wired rogues.
|
CSCte81420
|
When the access point crash was in process, the message "Dot11 driver" dot11_rate_is_allowed appears.
|
CSCte89891
|
The radio stops transmitting beacons periodically.
|
CSCte90918
|
WiSM locks-up during the upgrade with a full load of access points and clients.
|
CSCte92365
|
The auto immune attacks fix does not cover the incorrectly formatted association request.
|
CSCte95626
|
The Cisco 5508 Controller was not forwarding 100% of packets for the Gigabit line burst.
|
CSCte96140
|
Ethernet bridging breaks when the Ethernet interface of AP 1242 is flapped.
|
CSCtf03121
|
An optical SFP misconnect causes the Cisco 5508 Controller to disable its ports.
|
CSCtf03958
|
The WLAN Load Balance and Band Select should display Global Disabled as apply.
|
CSCtf06314
|
The WCS access point current associate client list is not up to date.
|
CSCtf06931
|
The controller emWeb crashes while running the ewaFormSubmit_blacklistclient_list.
|
CSCtf08553
|
The system log is not sent to the server that is on the same subnet as the dynamic interface.
|
CSCtf23682
|
An access point cannot join with the multicast MAC address as the gateway (checkpoint).
|
CSCtf27580
|
The Ethernet interface input queue wedge is from the broadcast/uniGRE traffic.
|
CSCtf28217
|
An access point unexpectedly joins the controller in bridge mode instead of local mode or H-REAP.
|
CSCtf33859
|
The client state is run with no IP address.
|
CSCtf34858
|
The client cannot transmit the traffic if it reassociates to an access point within 20 seconds.
|
CSCtf36051
|
The CPU ACL is not filtering after a reload.
|
CSCtf50921
|
Acct-Input-Octets counters do not reset for every accounting stop.
|
CSCtf53521
|
Directed broadcast does not work when the IGMP snooping is enabled.
|
CSCtf71637
|
The username entry in the accounting stop did not match the accounting start.
|
CSCtf94670
|
emWeb task crashed at usmWebGetSfpType.
|
CSCtf94679
|
The used memory increases by 25-MB immediately after bootup.
|
CSCtg10321
|
The Cisco 5500 controller crashes when all ports are disabled.
|
CSCtg34627
|
The video queue constrain limit allows only 9 to 10 clients of the 5-Mb stream.
|
CSCtg55102
|
AssocFailPayload causes a payload error at the controller.
|
CSCtg98413
|
There is a discrepancy between the help on the CLI and the actual code.
|
CSCth00490
|
The Dyn-int template with secondary port of 7 is getting applied while applying a dynamic interface.
|
CSCth02608
|
RRM RF group Leader Election did not occur.
|
CSCte55219
|
AMC radio core dumps with reason "transmitter seems to have stopped" due to a large number of uplink frames in the inprog queue.
|
CSCtf69598
|
There is a memory leakage in the access point upon a CCKM failure.
|
CSCtg71658
|
Access point level resets to 0 while upgrading from 5.0 to 6.0.
|
CSCtf65636
|
The access points that are crashed from the data TLB misses exception.
|
CSCth16398
|
Downloadable logs should include primaries.
|
CSCtd43906
|
RAP, which is a mesh access point, does not recover after the radar was detected.
|
CSCtf84965
|
CCKM roam fails with OEAP.
|
CSCtg89404
|
Association response to client is sent with AID 0.
|
Reader Comments