This document lists the software compatibility matrix information for the Cisco wireless devices used in a Cisco centralized and distributed wireless LAN solution.
This document contains the following sections:
•Software Release Compatibility Matrix
•Mesh and Mainstream Controller Software Releases
•Cisco Prime Network Control System Compatibility Matrix
•Wireless Control System Compatibility Matrix
•Inter-Release Controller Mobility (IRCM)
•Obtaining Documentation and Submitting a Service Request
See Cisco Technical Tips Conventions for information about document conventions.
Table 1 lists the Wireless Software compatibility matrix.
Table 2 lists the mesh and controller software releases and the compatible access points.
Note See the relevant release notes before you perform any software upgrade. The release notes are available at http://www.cisco.com/en/US/products/ps10315/prod_release_notes_list.html.
Table 3 lists the controller software releases that support specific Cisco access points. The First Support column lists the earliest controller software release that supports the access point. For access points that are not supported in ongoing releases, the Last Support column lists the last release that supports the access point.
Access Points
|
First Support
|
Last Support
|
|
---|---|---|---|
1000 Series |
AIR-AP1010 |
3.0.100.0 |
4.2.207.0 |
AIR-AP1020 |
3.0.100.0 |
4.2.207.0 |
|
AIR-AP1030 |
3.0.100.0 |
4.2.207.0 |
|
Airespace AS1200 |
- |
4.0.219.0 |
|
AIR-LAP1041N |
7.0.98.x |
- |
|
AIR-LAP1042N |
7.0.98.x |
- |
|
1100 Series |
AIR-LAP1121 |
4.0.155.0 |
- |
AIR-LAP1131 |
3.1.59.24 |
- |
|
AIR-LAP1141N |
5.2.157.0 |
- |
|
AIR-LAP1142N |
5.2.157.0 |
- |
|
1200 Series |
AIR-AP1220A |
3.1.59.24 |
- |
AIR-AP1220B |
3.1.59.24 |
- |
|
1230 Series |
AIR-AP1230A |
3.1.59.24 |
- |
AIR-AP1230B |
3.1.59.24 |
- |
|
AIR-LAP1231G |
3.1.59.24 |
- |
|
AIR-LAP1232AG |
3.1.59.24 |
- |
|
1240 Series |
AIR-LAP1242G |
3.1.59.24 |
- |
AIR-LAP1242AG |
3.1.59.24 |
- |
|
1250 Series |
AIR-LAP1250 |
4.2.61.0 |
- |
AIR-LAP1252G |
4.2.61.0 |
- |
|
AIR-LAP1252AG |
4.2.61.0 |
- |
|
1260 Series |
AIR-LAP1261N |
7.0.116.0 |
- |
AIR-LAP1262N |
7.0.98.x |
- |
|
1300 Series |
AIR-BR1310G |
4.0.155.0 |
- |
1400 Series |
Standalone Only |
N/A |
- |
3500 Series |
AIR-CAP3501E |
7.0.98.x |
- |
AIR-CAP3501I |
7.0.98.x |
- |
|
AIR-CAP3502E |
7.0.98.x |
- |
|
AIR-CAP3502I |
7.0.98.x |
- |
|
AIR-CAP3502P |
7.0.116.0 |
- |
|
1500 Mesh Series |
AIR-LAP-1505 |
3.1.59.24 |
4.2.207.54M |
AIR-LAP-1510 |
3.1.59.24 |
4.2.207.54M |
|
1520 Mesh Series |
AIR-LAP1522AG |
-A and N: 4.1.190.1 or 5.2 or later1 |
- |
All other reg. domains: 4.1.191.24M or 5.2 or later1 |
- |
||
AIR-LAP1522HZ |
-A and N: 4.1.190.1 or 5.2 or later1 |
- |
|
All other reg. domains: 4.1.191.24M or 5.2 or later1 |
- |
||
AIR-LAP1522PC |
-A and N: 4.1.190.1 or 5.2 or later1 |
- |
|
All other reg. domains: 4.1.191.24M or 5.2 or later1 |
- |
||
AIR-LAP1523CM |
7.0.116.0 or later. |
- |
|
AIR-LAP1524SB |
-A, C and N: 6.0 or later |
- |
|
All other reg. domains: 7.0.116.0 or later. |
- |
||
AIR-LAP1524PS |
-A: 4.1.192.22M or 5.2 or later1 |
- |
|
1550 Series |
AIR-CAP1552I-x-K9 |
7.0.116.0 |
- |
AIR-CAP1552E-x-K9 |
7.0.116.0 |
- |
|
AIR-CAP1552C-x-K9 |
7.0.116.0 |
- |
|
AIR-CAP1552H-x-K9 |
7.0.116.0 |
- |
|
AIR-CAP1552SA-x-K9 |
7.0.220.0 |
- |
|
AIR-CAP1552SD-x-K9 |
7.0.220.0 |
- |
1 These access points are supported in the separate 4.1.19x.x mesh software release or with release 5.2 or later releases. These access points are not supported in the 4.2, 5.0, or 5.1 Releases. |
Table 4 lists the compatibility matrix of Cisco Prime NCS, controller, access point images, Identity Services Engines (ISE), and mobility services engines (MSE).
Table 5 lists the Wireless Control System (WCS) compatibility matrix.
Cisco WCS and Cisco WCS Navigator must be from the same release in order to be compatible (see Table 6). Although the release numbers will not be the same, you must verify whether they were part of the same release.
For example, Cisco WCS Navigator 1.0 is compatible with Cisco WCS 4.1, and Cisco WCS Navigator 1.1.x is compatible with any Cisco WCS 4.2.x.
Note When Cisco WCS Navigator is upgraded to a new version, the corresponding Cisco WCS must also be upgraded to the corresponding new version. For example, if Cisco WCS Navigator is upgraded to version 1.6, Cisco WCS must also be upgraded to the corresponding version 7.0.
Table 7 lists the inter-release Controller Mobility (IRCM) compatibility matrix.