Cisco 6.0.199.0 Controller Code Release - Potential MD / AW Release
Friday, July 23, 2010 at 6:56PM
George

  

Cisco released a new rev in the 6.0 track, 6.0.199.0. Note: this has potential to be MD / AW tagged. Although, I will wait and see what fall out there is based on the previous releases in the 6.0. track.

Look at the resolved caveats. There are some BIG problems resolved with this reelase. 

Note:6.0 is a MD train and 6.0.199.0 is a potential MD / AW release. 6.0.199.0 release will be marked with MD / AW Tag after few weeks of customer adaptation and completion of AW release certification

 

Table 5 Resolved Caveats 

ID Number
Caveat Title

CSCtf63030

Radio get stuck when it is in the RESET or DOWN state.

CSCta91358

HREAP is locking up due to a wedge input queue on the radio interface.

CSCtb02136

AP1252 with AP groups and HREAP do not broadcast SSIDs.

CSCth05209

An OEAP configuration option needs to be removed in an unsupported platform.

CSCth02673

Errors occur when you apply the WLAN template with security as the WEP.

CSCtg93517

The wrong error message appeared while the H-REAP access point was added to a different H-Group.

CSCsx62302

REAP VLAN support mapping on an access point is lost when you upgrade from 4.2.176 to 6.0.182.

CSCtg93928

A traceback occurred on the mesh access point.

CSCsy90434

The controller command line displays that diversity was enabled for the 1522a radio.

CSCtg94715

Lock Assert dtlARPTask has caused the Cisco 5500 Series Controller to crash.

CSCtg74904

The Cisco 1142 Access Point stopped transmitting and receiving on its radio.

CSCth11525

A WLAN gets disabled after you add a new SSID to an existing access point group.

CSCsy93463

Debug the output through Telnet and SSH sessions.

CSCsy99905

RLDP constantly finds wired threats only when manually used.

CSCth09687

The controller GUI has a problem when configuring new ACL rules.

CSCsz19203

The controller crashes at SSHpmMainTask.

CSCsz37520

Noise was not factored in Channel Util calculations for AP1140.

CSCsz38828

AMAC radio core dumps: the transmitter has stopped working.

CSCsz40659

Need to reboot the wireless controller after an upgrade.

CSCsz42048

An inconsistency has occurred in the neighbor RSSI measurements.

CSCsz84895

An association response has the wrong set of supported rates for the 11b device.

CSCta04008

The call station type on the controller does not state that it is applicable to non-802.1X devices only.

CSCta13941

An access point is rejecting the association request with the status code 13.

CSCta34765

The controller console displays that invalid behavior occurred when you entered the config mirror port command.

CSCta41584

The backup port was not active when the primary port was disabled on the controller.

CSCta49375

The Cisco 4404 Controller crashes when you restart the sig11 at nPCSL_timer.

CSCta58642

LAP1252-P seems to have violated the maximum power levels in the regulatory domain.

CSCta71448

Reduce the severity of the error msg: %APF-1-CHANGE_ORPHAN_PKT_IP.

CSCtb20125

CCMP displays errors when the radio configuration is changed.

CSCtb34971

When the Controller WISM loads third-party certificates for web authentication, HTTPS port 443 is disabled.

CSCtb39368

The webauth custom page fails with some file extensions.

CSCtb39612

The WGA two device solution displays the "Cannot find MSCB for NPU SCB on console" message.

CSCtb42260

Enabling broadcast forwarding versus multicast forwarding through the controller CLI.

CSCtb44059

The controller should send the DHCP packets to the proper DHCP server.

CSCtb45178

Insufficient memory or a traceback occurred on AP1130 and AP1232.

CSCtb63297

A file read error message was reported in message log.

CSCtb69778

The output of the show log ip-port hash command was not correct in Telnet or SSH sessions. Instead, the output displayed results in the console window.

CSCtb92872

The WiSM with no access points crashed and the controller is unresponsive and you have to reset the hardware module to bring it up.

CSCtc01748

The Controller 2106 kernal panic crashed and hung while running combination stress test.

CSCtc13337

Even after the clients are associated to the controller, the message log displays an error saying no ACLS was defined on the controller.

CSCtc13378

The Cisco 5508 Controller crashed on the apfProbeThread.

CSCtc22661

An MFP anomaly was detected on deauthenticated frames.

CSCtc23210

MC2UC: Fragmentation has caused fewer clients to connect.

CSCtc23277

Radio driver is consuming all of the WLAN pool buffers.

CSCtc23789

The AP 1140 and 1250 radios were down and the interface was stuck in the reset state.

CSCtc29509

A predownload of the image has stopped after completing 18 out of the 230 access points on the controller.

CSCtc41797

RLDP does not work for G-only APs.

CSCtc44480

The access points were still transmitting ad-hoc deauths even after auto-contain was disabled.

CSCtc50424

The Cisco 5500 controller crashes and an error message "cond pbuf->dataLen <= 2048 failed" appears in the crashlog.

CSCtc51076

The "config spanningtree port mode off" settings are not saved in the backup configuration file.

CSCtc57611

Delay in Music on Hold on 7925 with HREAP AP.

CSCtc67372

On the controller with some access points, the SSH/Telnet session hangs with sh run output with paging disabled.

CSCtc73503

The radios are showing a Tx power level of 0.

CSCtc73527

Low latency MAC is not supported on the 802.11n APs.

CSCtc90985

The DMA input queue is overrun by fast Ethernet bursts.

CSCtc95434

An FTP transfer does not work on Cisco 2100 Controllers.

CSCtc97144

The 1800-seconds session that occurs after the session timeout has been fixed when H_REAP is in the standalone mode.

CSCtc97595

Only one of many gratuitous ARP packets is forwarded to the client.

CSCtd04572

Video metrics fixes and enhancements.

CSCtd06186

Directed broadcast does not work when IGMP snooping is enabled.

CSCtd21859

WLAN CKIP PSK is deleted when the Apply button is applied.

CSCtd23497

1242 AP HREAP Mode crashes after%CAPWAP-5-CHANGED the state to Join.

CSCtd26168

Incorrect source MAC address in the ARP request when the controller is in lag mode.

CSCtd26794

5508 DP was crashing and fragmentation consumes all pbufs.

CSCtd28542

The controller was crashing on EmWeb due to an access point configuration change.

CSCtd28757

The LDAP user password length needs to be increased.

CSCtd30669

WLAN security settings and session timeouts are changed after restoration.

CSCtd59231

The master bit configuration was not saved in xml.

CSCtd60522

The configuration backup adds the wrong 802.11a channel list.

CSCtd72649

The Cisco 4400 Controller crashes at osapi_task.c:3660.

CSCtd74472

The Cisco 5500 Controller crashes with the OSAPI reaper task and throws a null tunnel pointer exception.

CSCtd75089

The controller needs to have the "devshellsysapiDumpMbufStatus" command to show mbuf usage.

CSCtd75094

The access point crashed while clearing the CAPWAP MGIDs for the new client.

CSCtd86901

The mobility anchor configuration for WLAN is lost while copying the configuration through auto installation.

CSCtd92105

The controller reloads and the DHCP task reaper is reset.

CSCtd97011

When the AMAC radio core dump is observed, the neighbor discovery frames are stuck.

CSCtd99288

The client authentication trapflag cannot be configured through the CLI.

CSCtd99659

An SNMP agent inserts null data during the mesh link test.

CSCte08090

A TFTP upload fails while trying to upload a packet capture to the Windows TFTP server.

CSCte19262

The client is deauthenticated after the key exchange and displays an error message "Unable to locate AP 00:00:00:00:00:00".

CSCte27052

An inconsistency in the AAA Override feature occurred.

CSCte36493

The controller GUI displays a guest LAN error when the ingress is set to None on the anchor WLAN controller.

CSCte43508

5508 DP CRASH: buffer leaks due to ARP storm.

CSCte51177

The SNMP TRAP port number is not reflected in the configuration file of the controller.

CSCte55458

The web authentication page takes a long time to display under a heavy load.

CSCte62815

The Cisco 5508 Controller is not passing OSPF multicast traffic.

CSCte74879

The controller 5508 agentSwitchInfoPowerSupply MIB was not working.

CSCte76854

Unable to enable a WLAN on the Cisco 5508 Controller.

CSCte78472

An invalid PHY rate is returned on an ADDTS response.

CSCte79131

Containment details for the ad-hoc rogue is incorrect in the controller GUI.

CSCte79305

Auto containment for wired rogue access points does not contain wired rogues.

CSCte81420

When the access point crash was in process, the message "Dot11 driver" dot11_rate_is_allowed appears.

CSCte89891

The radio stops transmitting beacons periodically.

CSCte90918

WiSM locks-up during the upgrade with a full load of access points and clients.

CSCte92365

The auto immune attacks fix does not cover the incorrectly formatted association request.

CSCte95626

The Cisco 5508 Controller was not forwarding 100% of packets for the Gigabit line burst.

CSCte96140

Ethernet bridging breaks when the Ethernet interface of AP 1242 is flapped.

CSCtf03121

An optical SFP misconnect causes the Cisco 5508 Controller to disable its ports.

CSCtf03958

The WLAN Load Balance and Band Select should display Global Disabled as apply.

CSCtf06314

The WCS access point current associate client list is not up to date.

CSCtf06931

The controller emWeb crashes while running the ewaFormSubmit_blacklistclient_list.

CSCtf08553

The system log is not sent to the server that is on the same subnet as the dynamic interface.

CSCtf23682

An access point cannot join with the multicast MAC address as the gateway (checkpoint).

CSCtf27580

The Ethernet interface input queue wedge is from the broadcast/uniGRE traffic.

CSCtf28217

An access point unexpectedly joins the controller in bridge mode instead of local mode or H-REAP.

CSCtf33859

The client state is run with no IP address.

CSCtf34858

The client cannot transmit the traffic if it reassociates to an access point within 20 seconds.

CSCtf36051

The CPU ACL is not filtering after a reload.

CSCtf50921

Acct-Input-Octets counters do not reset for every accounting stop.

CSCtf53521

Directed broadcast does not work when the IGMP snooping is enabled.

CSCtf71637

The username entry in the accounting stop did not match the accounting start.

CSCtf94670

emWeb task crashed at usmWebGetSfpType.

CSCtf94679

The used memory increases by 25-MB immediately after bootup.

CSCtg10321

The Cisco 5500 controller crashes when all ports are disabled.

CSCtg34627

The video queue constrain limit allows only 9 to 10 clients of the 5-Mb stream.

CSCtg55102

AssocFailPayload causes a payload error at the controller.

CSCtg98413

There is a discrepancy between the help on the CLI and the actual code.

CSCth00490

The Dyn-int template with secondary port of 7 is getting applied while applying a dynamic interface.

CSCth02608

RRM RF group Leader Election did not occur.

CSCte55219

AMC radio core dumps with reason "transmitter seems to have stopped" due to a large number of uplink frames in the inprog queue.

CSCtf69598

There is a memory leakage in the access point upon a CCKM failure.

CSCtg71658

Access point level resets to 0 while upgrading from 5.0 to 6.0.

CSCtf65636

The access points that are crashed from the data TLB misses exception.

CSCth16398

Downloadable logs should include primaries.

CSCtd43906

RAP, which is a mesh access point, does not recover after the radar was detected.

CSCtf84965

CCKM roam fails with OEAP.

CSCtg89404

Association response to client is sent with AID 0.

 

Article originally appeared on my80211.com (http://www.my80211.com/).
See website for complete article licensing information.